Bidets and bidet attachments have grown in popularity among Scarborough homeowners looking for added comfort and water-conscious bathroom habits. Installing one usually means adding a dedicated water supply line to the toilet area and, for electric models, ensuring a nearby outlet is available, which we assess before beginning work in your bathroom.
We install both simple bidet attachments that mount under an existing toilet seat and standalone bidet fixtures that require their own supply and drain connections. In older Scarborough bathrooms where space is tight and shut-off valves may be original to the home, we often recommend upgrading the valve at the same time to ensure a reliable connection.
Signs You Need Bidet Installation
A bidet installation might be a good fit if:
You're renovating the bathroom anyway
Bathroom renovations are a convenient time to add bidet plumbing since walls and fixtures are already accessible.
You want a water-line bidet attachment
Many homeowners choose a simple attachment that connects to the existing toilet supply line without major changes to the room.
You're installing a standalone bidet fixture
A separate bidet fixture requires its own supply and drain, which is more involved but gives a traditional bidet setup.
Your current shut-off valve is old or corroded
Adding a bidet is a good opportunity to replace an aging valve that may not hold up well to an added connection.
How We Do It
How we install a bidet or bidet attachment:
Step 1: Assessing the setup
We check the toilet area for available space, the condition of the existing shut-off valve, and whether an outlet is needed for an electric model.
Step 2: Installing a T-valve or new shut-off
For attachments, we typically add a T-valve to the existing supply line, or replace the shut-off valve if it's old or difficult to operate.
Step 3: Running new supply lines
For standalone bidet fixtures, we run a new dedicated supply line and, where needed, a drain connection to the fixture location.
Step 4: Mounting the bidet or attachment
We install the attachment under the toilet seat or set the standalone fixture in place, securing it properly to the floor or wall.
Step 5: Connecting and sealing
All connections are tightened and checked for leaks, with attention paid to any electrical connection required for heated or electronic models.
Step 6: Testing function and fit
We test water flow and pressure, and for standalone units, confirm proper drainage before finishing the job.
Bidet installations in Scarborough bathrooms
Many bathrooms in Scarborough's post-war bungalows and back-splits, particularly in Wexford and Agincourt, were built with limited space around the toilet, which makes attachment-style bidets a popular choice since they don't require reworking the room's layout. Original shut-off valves in these homes are sometimes original to the house, and we often find it's worth replacing them when adding a bidet connection to avoid future leaks.
For homeowners renovating a main bathroom or adding a new one in a finished basement, a standalone bidet fixture is easier to plan for since supply and drain lines can be run as part of the broader rough-in work.
Why Choose Scarborough Plumbing
Experience with both attachment and standalone types
We install the full range of bidet options and can advise on which suits your bathroom layout best.
Attention to shut-off valve condition
We check whether your existing valve can support the added connection or should be replaced first.
Careful with tight bathroom spaces
Many Scarborough bathrooms are compact, and we plan installations to fit without crowding the toilet area.
Clean, leak-free connections
We test thoroughly after installation to make sure every fitting holds under normal water pressure.
Bidet Installation FAQs
What's the difference between a bidet attachment and a standalone bidet?
An attachment mounts under your existing toilet seat and uses a T-valve off the supply line, while a standalone bidet is a separate fixture with its own supply and drain connections.
Do I need an electrician for an electric bidet?
If a nearby outlet isn't already available, an electrician may be needed to add one, which we can flag during our assessment.
Can you add a bidet to my existing toilet?
Yes, most bidet attachments are designed to work with a standard toilet without needing to replace it.
Will installing a bidet affect my water pressure?
A properly installed bidet connection shouldn't noticeably affect pressure at other fixtures in the bathroom.
Is my old shut-off valve compatible with a bidet attachment?
It depends on its condition, and we often recommend replacing an old or corroded valve to ensure a reliable connection.
Related Services
Questions? Call (647) 249-7335 or send the form below.