A bathroom faucet sees near-daily use, and over time, worn washers, corroded valves, or outdated styles make replacement worthwhile. We install a wide range of bathroom faucets, from simple single-handle units to widespread three-hole designs, matching the new faucet to your sink's existing hole configuration or adjusting the setup where a different style is desired.
In many Scarborough homes with original bathroom vanities, we find supply lines and shut-off valves that are decades old and prone to sticking or leaking once disturbed, so we often recommend replacing these at the same time as the faucet to avoid a callback for a separate leak shortly after installation.
Signs You Need Bathroom Faucet Installation
Signs it's time for a new bathroom faucet:
Persistent dripping
A faucet that continues to drip after being shut off usually has worn internal components that are often not worth repeated repair.
Low or inconsistent flow
Mineral buildup or a failing cartridge can restrict flow even when supply pressure elsewhere in the home is normal.
Visible corrosion or staining
Green or white staining around the base of an older faucet often signals corrosion that's likely to worsen.
Loose or wobbly handles
Handles that have become loose over time can indicate worn mounting hardware inside the faucet body.
Renovating the bathroom
A vanity or countertop update is a natural time to install a new faucet that matches the updated look.
How We Do It
What's involved in a bathroom faucet installation:
Step 1: Assessing the existing setup
We check the sink's hole configuration, the condition of the shut-off valves, and the supply line connections before starting.
Step 2: Removing the old faucet
We disconnect the supply lines and remove the old faucet, clearing away any old sealant or mounting hardware.
Step 3: Preparing the sink surface
We clean the mounting area and confirm the new faucet's base or plate fits the existing hole spacing.
Step 4: Installing the new faucet
We set the faucet in place, secure it from underneath, and connect fresh supply lines to the shut-off valves.
Step 5: Replacing worn shut-off valves
Where valves are old, stiff, or leak-prone, we recommend replacing them during the same visit to avoid future leaks.
Step 6: Testing flow and checking for leaks
We run hot and cold water through the new faucet and check every connection underneath before finishing up.
Bathroom faucet replacement in Scarborough vanities
Original vanities in many Scarborough bungalows, particularly in Cliffside and Scarborough Village, often have shut-off valves that haven't been operated in years, and turning them to install a new faucet can sometimes reveal they no longer seal properly. We check these carefully before starting so a straightforward faucet swap doesn't turn into an unexpected leak.
Homes with updated vanities or newer countertops sometimes have different hole spacing than the original faucet, and we confirm compatibility before installation to avoid a mismatch between the faucet and the existing sink.
Why Choose Scarborough Plumbing
Careful matching to sink configuration
We check hole spacing and mounting style before selecting or confirming a faucet to avoid a mismatch.
Attention to aging supply valves
We flag and often recommend replacing old shut-off valves rather than reconnecting them to a new faucet.
Clean, leak-tested installs
We test every connection thoroughly before considering an installation complete.
Experience across styles
From single-handle to widespread faucets, we install the range of styles found in Scarborough bathrooms.
Bathroom Faucet Installation FAQs
Can you install any faucet style on my existing sink?
It depends on the hole spacing of your sink, which we check before confirming whether a chosen faucet will fit or needs adjustment.
Do you replace the shut-off valves during installation?
We often recommend it if the existing valves are old or stiff, since it avoids a separate leak issue shortly after the faucet is installed.
How long does a bathroom faucet installation take?
A standard installation is usually completed within a couple of hours, longer if valve or supply line replacement is needed.
What if my faucet keeps dripping after a repair?
Persistent dripping after repair often means the internal components are too worn to hold a seal, and replacement is usually more practical at that point.
Can you install a widespread faucet where a single-handle one used to be?
Sometimes, but it depends on whether the sink has the additional holes needed, which we assess before recommending a switch.
Related Services
Questions? Call (647) 249-7335 or send the form below.