Kitchen faucets handle heavier daily use than most other fixtures in the home, and over time, that wear shows up as dripping, reduced flow, or a stiff, hard-to-operate handle. We install a variety of kitchen faucet styles, including pull-down and pull-out sprayers, and take care to match the new faucet's mounting configuration to your existing sink or countertop setup.
Many Scarborough kitchens, especially in homes that haven't been renovated recently, still have original supply lines and shut-off valves under the sink that can be difficult to work with once disturbed. We check these components during every faucet installation and recommend replacement where needed to avoid leaks shortly after the new faucet goes in.
Signs You Need Kitchen Faucet Installation
Consider replacing your kitchen faucet if you notice:
Constant or intermittent dripping
A faucet that drips even when fully shut off usually has worn internal parts that repair alone won't fully resolve.
Reduced water pressure at the tap
Mineral buildup inside an older faucet can restrict flow even when the rest of the home's pressure is fine.
A stiff or sticking sprayer
Pull-down and pull-out sprayers that no longer retract smoothly often indicate worn hose or spring components.
Visible wear or corrosion
Discoloration or pitting on an older faucet's finish is a sign it may be nearing the end of its useful life.
Renovating the kitchen
A countertop or sink replacement is a convenient time to upgrade the faucet to match the new setup.
How We Do It
Our process for installing a new kitchen faucet:
Step 1: Checking the existing setup
We assess the sink's mounting holes, the condition of the shut-off valves, and the supply line connections before beginning.
Step 2: Removing the old faucet
We disconnect supply lines and remove the old faucet along with any old sealant around the base.
Step 3: Confirming fit for the new faucet
We check that the new faucet's base and any additional components, like a soap dispenser or side sprayer, match the sink's hole configuration.
Step 4: Installing and securing the faucet
We mount the new faucet, secure it from underneath the sink, and connect fresh supply lines.
Step 5: Addressing aging valves and lines
Where shut-off valves or supply lines are old or corroded, we recommend replacing them as part of the installation.
Step 6: Testing flow and function
We test hot and cold flow, sprayer function if applicable, and check all connections for leaks before finishing.
Kitchen faucet installation in Scarborough homes
Kitchens in older bungalows throughout Wexford and Agincourt often still have the original under-sink plumbing from decades ago, and supply lines in these spaces can be brittle or corroded by the time a faucet needs replacing. We take extra care working around these older connections to avoid causing a leak while installing the new faucet.
Second kitchens in basement apartments, common throughout many Scarborough neighbourhoods, sometimes use simpler faucet setups than the main kitchen, and we can match style and function to suit the space and how it's being used.
Why Choose Scarborough Plumbing
Careful fit-checking
We confirm hole spacing and mounting compatibility before installing a new kitchen faucet to avoid mismatches.
Attention to supply line condition
We flag aging or corroded supply lines and valves rather than reconnecting them without a check.
Experience with sprayer and pull-down models
We install the full range of modern kitchen faucet styles found in Scarborough kitchens today.
Thorough leak testing
We check every connection under the sink before considering an installation finished.
Kitchen Faucet Installation FAQs
Can you install a pull-down faucet on my current sink?
In most cases yes, as long as the sink has enough clearance and compatible mounting holes, which we check before installation.
Do you replace supply lines when installing a new faucet?
We check their condition and often recommend replacement if they're old, brittle, or corroded, to avoid a leak after installation.
How long does a kitchen faucet installation take?
A standard replacement typically takes a couple of hours, longer if valve or supply line work is also needed.
Can you install a faucet with a separate soap dispenser?
Yes, provided the sink has an available hole for it, or we can discuss options if it doesn't.
What if my new faucet doesn't match my old sink's hole spacing?
We check compatibility before installation and can advise on options like a deck plate to cover extra holes if needed.
Related Services
Questions? Call (647) 249-7335 or send the form below.